The Quilt Sweater

QuiltCon fashion is a bit part of the experience and I made myself 2 new articles of clothing for the big event. The first I'm sharing is my 'quilt sweater'.

Why a sweater?

First, it's not quilt a traditional quilted coat - there is no batting and no lining fabric. 

Instead, the fabric is sewn directly onto a disassembled sweatshirt.! The technique of using a sweatshirt is not a new one - I seem to remember seeing these back in the late 70s/early 80s.

Here are the basic steps:

• I prewashed my sweat shirt and then cut it apart using scissors cutting as close to the seam as possible. Once cut, I neatened up the sleeves and front panels and made sure the pairs matched.
• Using a basting stitch, I sewed back the seam just to make sure that it was going to fit and then pulled those stitches out!
• I sewed a whole bunch of HST and made panels which were just slightly larger that my sweatshirt pieces.
• Everything was carefully ironed flat and then I basted the HST panels to the sweatshirt as close to the edge that I could. I choose to keep the fuzzy part of the sweat shirt as the inside.
• Using 12 wt thread, a few lines of hand quilting were added on each panel just to keep things from sliding around. Once complete, the excess of the HST panel was trimmed away

• Pockets were basted to each of the front panels
• Reassembled the garment with a 3/8" seam allowance and curved the top of the front panels slightly for a more flattering edge.
• 
  Bias binding was machine sewn and then hand sewn to the back.

The sleeves gave me the most trouble. When they were disassembled, I didn't cut very close to the seam so they were smaller then I liked. I ended up putting an open pleat on each one so it wasn't too tight.

I love a good pocket and really felt the hoodie sweatshirt style pocket would work well. I assembled HST for the front and the lining for the pocket. 

Because I could, I lined up the HSTs on the pockets with those on the front panel. The very top of the pocket was stitched down while the sides and bottom were caught up in the side seam and the binding.

The very top of the pocket was stitched down while the sides and bottom were caught up in the side seam and the binding.

This quilt sweater was the perfect weight for the convention floor. I got many a complement and even ended up in Quiltfolk's fashion reel. In fact, I am the thumbnail - my claim to fame - see the reel here.

Have a wonderful day! Patty