Monday, August 31, 2015

Harvest QAL - Cutting instructions for background fabric



I am so excited to get started here and hope you are too!

Before we get to the background fabric quilting instructions themselves, a bit about the QAL

Information on overall fabric requirements is available in this post and will also be in this week's instructions.

Overall schedule is here.

The details of each week's blocks will be released as free patterns on Craftsy in my pattern store.   I really went to town on these - I had so much fun putting them together using EQ7 and other nifty tools.



Don't use Craftsy but still want to quilt along?  No problem - just fill in this form and leave your email address or leave a comment with your email.  It's that easy - I'd be happy to send things to you via email.  And, don't worry, I won't share that email address with anyone.

(But I do recommend you check out Craftsy - so much good stuff there!)





Don't want to wait for the blocks each week?  The full pattern is available in my Craftsy store as well for a small fee.



Ok, enough of the background information, let's get started on cutting the background fabric!


EXAMPLE
The Craftsy pattern has all the instructions for cutting and labeling every piece of background fabric you'll need.

However, unless you are a super organized person and clearly label everything, I also offer instructions on a recommended way to proceed.  Cut all theWOF (width of fabric) strips that you'll need along with a few pieces as indicated and then cut the rest as you go.  The weekly QAL instructions will repeat the needed background details.  (see example to the right.)

Here is the link to QAL week 1 - background cutting instructions.

I hope to do a linky party at the end - until then, use the comments to let everyone know you are playing along.

 If you do a blog post or Instagram- and I'd love it if you did - please refer back to Elm Street Quilts and use #elmstreetquilts
.


 Enjoy!



Have a wonderful day! Patty

Monday, August 24, 2015

Harvest Quilt Along - Fabric Requirements

Time to shop your stash or shop your favorite quilt store in order to gather up the fabrics you'll need for your very own Harvest quilt.



My sample used 7 primary fabrics for all the blocks and then I used 2 other fabrics for the accent strips.   



For this quilt, there are several options for gathering your fabrics.

Need an excuse to go fabric shopping?   Here is your shopping list:
  • Seven (7) fat quarters including orange(s) for the pumpkins and red(s) for the apples.  (Your accent strips will come from the fat quarters)
  • 1 ¼ yards background fabric
  • 1 yard backing fabric
  • 1/3 yard binding fabric
  • Small piece of fusible for applique




Want to shop your stash and go super scrappy?  Here is your gather list:


  • 1 ¼ yards background fabric
  • 1 yard backing fabric
  • 1/3 yard binding fabric
  • Small piece of fusible for applique
For the fall fabrics, you can use this table to build your super scrappy fabric pile. 

For example, for the Churn Dashes, you'll need 5 fabrics, each 5 x 5 '' - a leftover charm square would work nicely.  

Another example, for the Spool, you'll need 3 fabric scraps, each 6 ½ x 5 ½ ''.

Many of these blocks are charm pack friendly as well.


Interested in matching the sample?




Pull 9 fabrics in all to make the blocks as noted here.  

Additional information on the QAL including links to the overall posts can be found here.  

Here is our schedule:


  • Background fabric cutting instructions (August 31)
  • Apples and pumpkins (September 7)
  • Flying geese (September 14)
  • Leaves and Churn Dash (September 21)
  • Hour Glass and Spools (September 28)
  • Final assembly instructions (October 5)
Let me know in the comments if you are playing along!
Have a wonderful day! Patty

Sunday, August 23, 2015

Block 101 - Flying Geese

Flying geese are my probably my favorite block to make.  There is something almost magical about how this block is made.

I didn't invent this no waste method and you can find other tutorials on line for different ways of making geese.

But here is mine

To make a set of 4 geese, you'll need one large square and 4 small squares.



Let's make geese that will be 2" x 3½'' (unfinished).

For geese this size, you'll need a 4½'' square of your primary fabric plus four (4)  2½'' squares of the background fabric.

Draw a diagonal line on the wrong side of each of the background squares. 

Pin 2 of the background squares onto the larger square, right sides together and lining up your diagonal lines.



Sew a scant ¼ “ to either side of the drawn line - first to one side...


and then the other:



 Cut apart .



Finger press open.  Pin a single square, right sides together, lining up the diagonal line to the corner.



Sew a scant ¼ '' to one side of the drawn line.


And then the other.



Cut apart.



Finger press to see the magic



Tada!  You just made 4 lovely magical flying geese.

You need to trim carefully to get to 2'' x 3½''.  The ruler pictured is called the Wing Clipper but there are several other rulers out there.  You can also just use your regular ruler.  The key is to make sure that the tip of the geese is centered with the 3½'' and that there is a generous ¼'' between the tip and the edge so that you won't lose the tip when you sew them together.



Trim top and right side. 



Flip and align to the desired size.  Trim again.


Nicely trimmed and ready for flight.


And now joining the flock.


You can make geese in all sizes.  My example made flying geese that were 3½ x 2 '' (unfinished) or would be 3 x 1 ½ '' (finished).

The formula for creating geese any size you want is easy.  Start with any finish size you want - the height and the width.  The height will be half the size of the width.

For the primary color - the gold used in the sample is the primary color - add 1½" to the width (W) you want and cut a square at that size.   For the secondary color - the white in my sample - add 1'' to the height (H) and cut 4 squares at that size.   

Confused?  Try the table or let's do some math:

You need a flying geese unit which will finish in your quilt at 4'' tall and 8'' wide (4 x 8")?  You'll need to cut a square at 9½'' (width of 8'' plus 1½'') of the primary color.  You'll need to cut 4 squares of the secondary color at 5'' (height of 4'' plus 1'').


Now start creating your very own flock!

Have a wonderful day! Patty

Monday, August 17, 2015

Harvest Quilt a Long


I love summer.  It is my favorite season - the beach, swimming laps at the pool and the long hours of daylight.

But there is something about fall that really sparks my quilting juices.

I am very excited to announce my very first Quilt along to make this Harvest wall hanging.


The wall hanging will finish at 31 x 31" and gives you the chance to play with all the lovely browns, golds and orange fabric in your stash.

Along the way, we'll make some favorite blocks including flying geese and churn dash blocks.

The specific fabric requirements will be posted next week and then the blocks will be posted in pairs throughout September.



You can find the schedule here.

Will you come play along?  It will be great fun!  Leave me a comment if you are going to sew along!




Have a wonderful day! Patty

Wednesday, August 5, 2015

Diamonds (tutorial)


Diamonds are a girl's best friend - even when they are not the shiny, precious kind!

This mini quilt measures 9 1/2" square and can be put together quickly.

You'll need the following materials:

  • 18 squares of fabric, each 2 1/2"
  • 18 square of background fabric, each 2 1/2"
  • 12" square of backing material
  • 12" square of batting
  • 1 strip WOF (width of fabric) for binding.  I cut mine at 1 1/2" for a thin binding
To assemble:
  • Create 18 half-square triangles (HST) following the instructions here.  Press and trim each to 2".
  • Create 9 blocks - each block will use two sets of HST.  To assemble blocks, lay 2 sets of contrasting HST as shown in photo.
  • Sew top row and bottom row together.  Leave blocks connected (see that chain of thread?).  
  •  Press.

  • Sew top and bottom together.  Press.

  • Assemble your 9 blocks in a pleasing arrangement and assemble rows.
Your mini quilt top will now measure 9 1/2" square.  Press.

Quilt as desired.  For this sample, I did dense straight line quilting.  My first step was to stabilize the piece by sewing the a straight line through the centers of the blocks and then sewing around the edge of the entire piece.

The binding was cut at 1 1/2" and sewed on at something less than 1/4" to avoid loosing too much of the diamond points.



This quilt was also published on my blog A Stitch in Time.

Have a wonderful day! Patty